Suzuki Burgman 400 - Service manual > Speedometer Inspection

If the speedometer, odometer or trip meter does not function properly, inspect the speedometer sensor and connection of coupler. If the speedometer sensor and connection are all right, replace the meter with a new one.

Refer to "Combination Meter Disassembly and Assembly".

Speed Sensor Removal and Installation

Refer to "Speed Sensor Removal and Installation ".

Speed Sensor Inspection

Refer to "Speed Sensor Inspection ".

Ignition Switch Inspection

Refer to "Ignition Switch Inspection".

Ignition Switch Removal and Installation

Refer to "Ignition Switch Removal and Installation".

Horn Inspection

Horn Button Inspection

NOTE If the horn sound condition is normal, it is not necessary to inspect the horn button continuity.

Refer to "Horn Button Inspection".

Horn Inspection

Inspect the horn in the following procedures:

1) Remove the horn mounting bolt (1) and disconnect the horn couplers (2).

2) Connect a 12 V battery to terminal "A" and terminal "B". If the sound heard from the horn, replace the horn with a new one.

3) After finishing the horn inspection, reinstall the horn coupler and horn mounting bolt.

Horn Removal and Installation

Removal

1) Remove the horn mounting bolt (1).

2) Disconnect the horn couplers (2).

Installation

Install the horn in the reverse order of removal.

Specifications

Service Data

Wattage

Unit: W

See also: