Suzuki Burgman 400 - Service manual > Starter Button Inspection

Inspect the starter button in the following procedures:

1) Remove the meter panel. Refer to "Meter Panel Removal and Installation".

2) Disconnect the right handlebar switch coupler (1) and (2).

3) Inspect the starter button for continuity with the tester. If any abnormality is found, replace the right handlebar switch assembly with a new one. Refer to "Handlebars Removal and Installation".

Special tool : 09900-25008 (Multi-circuit tester set)

Tester knob indication
Continuity ()

4) After finishing the starter button inspection, reinstall the removed parts.

Ignition Switch Inspection

Inspect the ignition switch in the following procedures:

1) Remove the front leg shield. Refer to "Front Leg Shield Removal and Installation".

2) Disconnect the ignition switch coupler (1).

3) Inspect the ignition switch for continuity with the tester. If any abnormality is found, replace the ignition switch assembly with a new one.

Special tool : 09900-25008 (Multi-circuit tester set)

Tester knob indication
Continuity ()

4) After finishing the ignition switch inspection, reinstall the removed parts.

Parking Brake Switch (Brake-lock Switch) Inspection

Inspect the brake-lock switch in the following procedures:

1) Remove the front box. Refer to "Front Box Removal and Installation".

2) Disconnect the brake-lock switch lead wire couplers (1).

3) Inspect the brake-lock switch for continuity with the tester. If any abnormality is found, replace the brake-lock switch assembly with a new one.

Special tool : 09900-25008 (Multi-circuit tester set)

Tester knob indication
Continuity ()

4) After finishing the brake-lock switch inspection, reinstall the removed parts.

Trunk Box Switch Inspection

Inspect the trunk box switch in the following procedures:

1) Remove the left footboard. Refer to "Footboard Removal and Installation".

2) Disconnect the trunk box switch coupler (1).

3) Inspect the trunk box switch for continuity with the tester. If any abnormality is found, replace the trunk box switch assembly with a new one.

Special tool : 09900-25008 (Multi-circuit tester set)

Tester knob indication
Continuity ()

4) After finishing the trunk box switch inspection, reinstall the removed parts.

Specifications

Service Data

Wattage

Unit: W

Special Tools and Equipment

Special Tool

09900-25008 Multi-circuit tester set

See also: