Yamaha XMAX YP125R - Service manual > Thermostat (YP250R)

Removing the thermostat
Removing the thermostat

Checking the thermostat

1. Check:

Does not open at 80.5-83.5 ºC (176.9-182.3 ºF) → Replace.

a. Suspend the thermostat "1" in a container "2" filled with water.

b. Slowly heat the water "3".

c. Place a thermometer "4" in the water.

d. While stirring the water, observe the thermostat and thermometer's indicated temperature.

Checking the thermostat

A. Fully closed

B. Fully open

TIP

If the accuracy of the thermostat is in doubt, replace it. A faulty thermostat could cause serious overheating or overcooling.

2. Check:

Cracks/damage → Replace.

Installing the thermostat

1. Install:

TIP

Install the thermostat with its breather hole "a" in the position shown in the illustration.

Installing the thermostat

2. Fill:

(with the specified amount of the recommended coolant)

3. Check:

Leaks → Repair or replace any faulty part.

See also:

 Yamaha XMAX YP125R - Service manual > Radiator (YP250R)

Removing the radiator Checking the radiator 1. Check: Radiator fins

 Yamaha XMAX YP125R - Service manual > Water pump (YP250R)

Removing the water pump Removing the water pump

Maxi Scooters: