Vespa GTS Super 300 ie - Service manual > Electrical System
- Components arrangement
- Electrical system installation
- Conceptual diagrams
- Checks and inspections
- Starter motor
- Electric characteristic
- Battery installation
- Connectors
- Diagnostic instrument
See also:
Vespa GTS Super 300 ie - Service manual > Cooling/Braking system
Cooling system Adding engine coolant. The fluid level must checked every 10,000 kilometres with a cold engine, in the way shown below: Place the scooter on its centre stand and on flat ground. Undo the screw shown in the figure and remove the expansion tank cap on RHS. Top up if the fluid level is near or below the MIN level edge. The liquid level must always be between the MIN and MAX level. The coolant consists of an ethylene glycol and corrosion inhibitor based 50% de-ionised water-antifreeze solution mix.
Vespa GTS Super 300 ie - Service manual > Components arrangement
9. Immobilizer aerial Remove the shield back plate to reach it.
